Tire repair kit

Kit for quick repair of tubeless tires without the need to remove the tire from the disc. This kit is suitable for both cars, motorcycles, ATVs and other tubeless tires.

Instructions for use:
1. Find the place where the tire is punctured and remove the object that caused the puncture (if it is still in the tire).
2. Insert the reamer (awl / drill) into the hole, and then pull it up and down - until it easily passes through the hole - the hole is thus cleaned and prepared.
3. Pass the wick stripped of the protective film through the opening of the fork and apply the vulcanizing solution to it.
4. Insert the fork with the wick attached into the hole so that half of it remains on the outside of the tire, then turn the fork 1/4 and slowly pull it out.
5. Cut off the rest of the wick as close to the tire as possible.

Note: This kit can only be used for tire tread repairs. Cannot be used for tire sidewall repairs.

• drill bit
• wick fork
• 3x repair wick
• vulcanization solution (12g)