Solar wall lamp and motion and twilight sensor

Year-round solar lamp with 100 LEDs, intended for mounting on the wall. Application on buildings, gazebos, gardens, garages, land, real estate, parking lots. It has two modes with motion sensor or twilight. Degree of protection IP65. The lamp has a luminous flux of 1000 lumens, its operating time is approximately 8 hours - it is charged by a solar panel. On sunny days or 1-2 cloudy days, the charging time is about 6 hours. The PIR motion sensor has a range of up to 5 m.

ENERGY SAVING AND ENVIRONMENTALLY FRIENDLY

An efficient solar lamp with up to 100 COB LEDs with a connected solar panel is an inexhaustible source of free energy for your home. Install it anywhere - you can hang the solar panel within 5 meters of the lamp (that's the length of the cable connecting the two modules). Reduce the cost of outdoor lighting with a focus on the environment - no need to change batteries or change bulbs often! COB LEDs have an efficiency of up to 35,000 hours!


MOTION SENSOR

The 100 COB LEDs, thanks to the built-in motion and twilight sensor, will light up only at night and only when the lamp detects movement around it. Thanks to this, you no longer have to remember how to turn the light on and off outside.

100 SUPER BRIGHT LEDs + solar panel (cable is 5 meters long),
BUILT-IN MOTION SENSOR - the light only turns on when motion is detected within the range of the detector
BUILT-IN SENSOR - the lamp is activated only at dusk and dark

Technical data

PIR motion sensor with a range of 5 m,
twilight sensor,
continuous battery operation extended to 8 hours,
high energy efficiency class A,
charging time approximately 6 hours on a sunny day or 1-2 cloudy days,
lifetime of the LED source over 10,000 hours,
color temperature: cool 5500-6000K,
lamp dimensions: 14.8 cm x 12.5 cm x 2.2 cm,
panel dimensions: 12.7 cm x 11.3 cm x 1.3 cm,
After motion is detected, the lamp turns on for 30-45 seconds
power: solar
material: aluminum, glass, PVC,
black color
battery: 1× 18650, 3.6V
Installing the lamp:

We assemble the lamp using the attached mounting pins
We install a solar panel with access to sunlight
Connect the end of the solar panel cable to the lamp and turn on the lamp