Cranit Chlorine Shock - Rapid water disinfection

Disinfectant for all-season maintenance of all types of pools, especially for one-time, ie "shock" treatment of pool water after soaking or in case of heavy pollution. Eliminates algae and bacteria. Using 1.8 g of the preparation per 10 m ^{3 of} water increases the content of active chlorine by approx. 0.1 mg / l.

Instructions for use: After filling the pool with water, first adjust the pH value to 6.8 - 7.6. Then pour the initial dose of the product (granulate dissolved in water in a plastic container) into the skimmer or directly into the pool with the filter device switched on. Until the product is thoroughly mixed by the filter device, it is necessary to exclude the presence of people in the pool! Chlorination is recommended in the evening. The next day, apply Cranit chlorine tablets. During regular operation, add a continuous dose of Cranit Chlorine Shock. In case of increased operation, higher temperature or if there is a problem with algae, apply an increased dose. It is necessary to keep the content of active chlorine in the range of 0.3 - 0.8 mg / l and pH 6.8 - 7.6. At elevated water temperature, the nude content can be increased for a short time. chlorine up to 1.0 mg / l. Check the chlorine content and pH value once a week using testers (Cranit tester for 4in1 pools).

Use biocides safely. Always read the label and product information before use.

Properties

• Disinfects all types of pools;
• Eliminates algae and bacteria;
• Increases the content of active chlorine;