Světlo zad.sdruž. FT-500/136 left + antenna FT-145

Light functions: contour end, brake, direction, reverse, fog
Dimension (mm): 569 (400) x 153 x 88
Mounting side: left
Version with 7-pin TYCO (AMP) connector.

ADVANTAGES:
-mainly it is a HYBRID light
- as a user, YOU have the option to switch the light bulb using the LED panel and vice versa
-replaceable light cover (you don't have to throw out the LED light if the light cover is damaged),
-,,resistor” on the direction light, to eliminate error messages
-universal spacing of fastening screws,
-two fuse sockets for flat fuses that protect optionally connected lights (fuses are not standard equipment of the light),
-possibility of mounting a reversing alarm,
-dynamic LED direction light.

LIGHT FUNCTIONS:
marker light
brake light
dynamic direction light
reverse light
fog light
sensor FT-145 LED
reflector triangle

LED LIGHT PARAMETERS:
-supply voltage range: 12–36V DC
-operating temperature: –40°C to +55°C
- protection against polarity reversal
-modules are impact resistant
and adverse weather conditions

LED CONSUMPTION:
-marking light + license plate light:
12V/24V = 0.12A / 0.12A
- brake light: 12V/24V = 0.34A/0.17A
-direction change indicator: 12V/24V = 0.4A/0.2A
-reverse light: 12V/24V = 0.1A/0.05A
-fog light: 12V/24V = 0.34A/0.17A

POWER SUPPLY (POWER):
- outline light + license plate light: 12V/24V = 1.5W / 3.0W
-brake light: 12V/24V = 12V/24V = 4.1W/4.1W
-direction change indicator: 12V/24V = 12V/24V = 5W/5W
-reverse light: 12V/24V = 12V/24V = 1.2W/1.2W