Mirror gluing set

Contains:

A - substrate (translucent container with liquid).

B - glue (plastic tube).

How to use: Mark the location of the old rear-view mirror on the outside of the window. Mechanically clean the glued surface from the old glue, eg with a razor blade. Peel off the paper case and bend the plastic container so that the inner glass cylinder breaks. The base fluid flows onto the felt tip. Apply a thin layer of substrate to one of the bonded surfaces (eg a metal mirror holder that will be applied to the glass). Wait 1-2 minutes for it to dry. Carefully tear off the end of the plastic glue tube. Apply one drop or a thin layer of glue to the pre-cleaned surface. The adhesive is evenly distributed when the metal holder is placed on the glass. Press the metal holder against the glass for about 30 seconds. Be careful not to move the glued parts during gluing. Wait about 10 minutes before fitting the rearview mirror.