magnetic LED beacon with remote control wlbat73re

Battery charger warning orange beacon with LED technology and flashing / rotating mode . _ _ _ _ _ Designed for attachment using a magnet .

Part of the package is a CL charger for the car cigarette lighter 12-24V .

Switch on - with the button on the front of the beacon , switch off - hold the button for a long time until the beacon turns off . By briefly pressing this button , you can change 7 different modes of warning flashing .

After turning on the main switch , the lamp can be controlled with the remote control . Turn on, off and switch modes .

Technical parameters:

• ECE R65, R10 homologation ( R65 homologation is fulfilled only if the device is connected by a cable to the CL socket )

• supply voltage 12 / 24V _ _

• charging time only : 4h

• lighting time : 6h _

• 7 different warning flashing modes , including rotating mode _ _ _ _ _ _

• attachment to a magnet

• remote control _ _ _

• protection against moisture IP 65

• working temperature - 4 0 - + 65 °C

• dimensions : diameter 130 mm, height 140 mm

Notice:

Long-term storage of lithium batteries is recommended when charged to approx. 60-80% capacity. It is advisable to recharge to this level approximately once a year .

Long-term storage of fully charged cells can lead to their deterioration.

Magnetic beacons and ramps are not firmly attached and are intended especially for marking a stationary vehicle!!! When used while driving, high speed (weather, wind, dirt on the vehicle) may cause the ramp/beacon to fall and be destroyed. Attention - a fallen beacon/ramp can cause material damage, or endanger health and lives. Neither the manufacturer nor the seller bears any responsibility for the magnetic beacon (ramp) used while driving.